TLG STEEL DRAG CHAIN SERIES

TLGSTEELDRAGCHAINSERIESFeatures:■TLGtypesteeldragchaincancarrycablesandpipelineswithlargequantityandheavyweight,withlargefreesuspensionlengthandoptionalsupportplate,whichissuitableforworkingmothermachinemobilemachinery,etc.Thebendingradiusis50-600mm,andtheheightofthechainplateis35-150mm,optional.■...

Product Details

Model Bending R(mm) Pitch Distence Hi Ha d e f g h k No Support Wheel Allowed Weight/M
Length (m) Load(KG/M) Width =100mm
TLG75 100/150/200 75 31 50 8 4 30 12 9 15 4 22 5
250/300
TLG100 150/200/250 100 49 75 10 4 50 17 11 21 6 30 9.3
300/400
TLG125 200/250/300 125 68 100 14 4 70 22 13 28 8 40 18.4
400/500
TLG175 250/300/400 175 118 150 14 8 115 26 13 32 15
500/600


Features:           
■TLG type steel drag chain can carry cables and pipelines with large quantity and heavy weight, with large free suspension length and optional support plate, which is suitable for working mother machine mobile machinery, etc. The bending radius is 50-600mm, and the height of the chain plate is 35-150mm, optional.
■TLG type steel towline has a maximum travel distance of 320 meters and is suitable for all transmission modes. It can be lengthened or shortened at will, and the bending radius can be changed by adjusting the pin shaft.
■The supporting width of the chain plate is 150-600mm, and the interval between the holes is 5mm.
■The height of the chain plate, that is, the height of the support plate, is determined by the maximum diameter of the cable. If the width of the towline exceeds 300mm and the length of the towline exceeds 4m when the machine tool is running to the maximum, for the sake of stability, the towline with a larger size should be selected.
■The bending radius should be selected according to the maximum diameter of the cable and reach 10 times that of the cable smuggling. The bending radius can be selected from 50-600mm according to the table, and a smaller radius can be selected correspondingly if the stroke is small.
■The length of the drag chain = 1/2 stroke + 4 times the bending radius. This formula applies when the fixed end is at the mid-stroke.
■The fixing of the drag chain is selected according to the position of the machine tool. The fixed angle steel can be placed on the outer circumference or the inner circumference inside or outside the towline. Generally, the connecting part is in the towline and towards the outer circumference.

Installation and Use Diagram

Support Plate Form

Connection Manner

Parameters